Changed Products
To support your requirements in the best possible way and to use the latest technologies, we continuously develop our products further. Here you will find information on current product changes.
Industrial cameras
CAMERA FAMILY/MODEL |
MODIFICATION |
MODIFICATION DATE |
DESCRIPTION OF PRODUCT CHANGE |
|---|---|---|---|
|
Eco-friendly boxing |
12 July 2024 |
|
|
Housing facelift for UI-1007XS-C |
8 April 2024 |
|
|
uEye XLE Rev.1.2 with USB 3 interface – GPIO add-on |
1 September 2023 |
|
|
uEye XCP Rev.1.2 with USB 3 interface – GPIO 1 correction |
1 September 2023 |
|
|
uEye+ cameras with USB3 interface obtain optimized FPGA timing |
1 July 2023 |
|
|
uEye XLE with USB 3 interface - change of I/O connector |
1 March 2022 |
|
|
Size of label is changing for IDS uEye cameras and IDS NXT cameras |
1 December 2021 |
|
|
Electronic component change of USB 2 uEye LE cameras |
1 January 2021 |
|
USB 3 uEye LE cameras, HU and VU connector versions:
|
USB 3 uEye LE PCB harmonisation (connector add-on) |
1 November 2020 |
|
|
Size of label is changing for IDS uEye cameras with metal housing and IDS NXT cameras due to new compliance certificates |
1 November 2020 |
|
|
Improved sealing for USB 2 uEye LE and USB 3 uEye LE cameras with s-mount lens holder |
1 August 2020 |
|
Except: UI-536xCP and UI-537xCP |
Improved sealing and immersion depth of lenses for uEye CP Rev.1 cameras |
1 May 2020 |
|
|
New Revision for USB 3 uEye CP cameras with PYTHON 2000 and PYTHON 5000 CMOS sensors |
14 November 2017 |
Ensenso 3D cameras
CAMERA FAMILY/MODEL |
MODIFICATION |
MODIFICATION DATE |
DESCRIPTION OF PRODUCT CHANGE |
|---|---|---|---|
Ensenso X |
Upgrade to 2.5GBit uplink speed |
20 February 2023 |
|
Ensenso S |
Housing ventilation with adhesive membrane vents |
15 December 2022 |
|
Ensenso X/XR |
Lens tubes for 8mm or 12mm lenses |
01 December 2022 |
|
Ensenso X/XR |
Revised sync cables |
26 April 2022 |
|
Ensenso X/XR |
Additional spring dowel holes for Ensenso X and XR projector units |
01 August 2021 |
|
Ensenso X/XR |
Ensenso X/XR static lenses |
01 July 2021 – For Ensenso X this change will follow the front lens tube adaptor change. |
|
Ensenso X/XR Ensenso X |
Ensenso X/XR LED type Ensenso X integrated lens tube adaptor |
Ensenso XR LED type: 01 August 2021 |
|
Ensenso X30/X36 |
Ensenso X Projector Firmware Application v29 & Bootloader v11 |
26 May 2021 |
|
Ensenso X/XR |
New goniometer mechanics and 1.6MP models replacing 1.3MP models |
01 April 2021 |
|
Ensenso N/X/XR |
Changed branding and labelling of Ensenso products |
01 April 2021 |
|
Ensenso X/XR |
Appliance and optional omission of lens thread locking varnish for Ensenso X/XR models |
15 December 2020 |
|
Ensenso X/XR |
Omission of lens screw set for Ensenso X/XR models featuring 5MP lenses |
1 December 2020 |
|
Ensenso N30/N35 |
Ensenso N30/N35 Rev. 2 cameras replace current N30/N35 cameras |
N30/N35 IR models: 1 November 2020 |
Software
PRODUCT |
MODIFICATION |
MODIFICATION DATE |
DESCRIPTION OF PRODUCT CHANGE |
|---|---|---|---|
IDS lighthouse |
Discontinued hosting partner option: AWS cloud service |
30 June 2023 |
Accessory
PRODUCT |
MODIFICATION |
MODIFICATION DATE |
DESCRIPTION OF PRODUCT CHANGE |
|---|---|---|---|
IDS accessories |
Eco-friendly boxing |
12 July 2024 |
|
IDS accessories (e.g. tripod adapters) |
Change of part number |
1 November 2021 |
|
USB 3 drag chain cables with USB Micro-B connector |
Raw cable change for USB 3 hiflex cable |
1 August 2020 |
|
GigE-LE PowCon Daughterboard |
Part Number Change of GigE-LE PowCon Daughterboard |
1 July 2021 |
IDS harmonizes the part numbers of accessories (e.g. tripod adapters). The new part numbers of the affected IDS accessories start with ‘AL’ instead of ‘CK’.
CK00283 to AL00083, CK00174 to AL00084, CK00089 to AL00085, CK00419 to AL00086, CK00557 to AL00087, CK00751 to AL00088, CK01459 to AL00090, CK01459.1010 to AL00092, CK01463.1010 to AL00094, CK00717 to AL00095, CK.0028.2.04800.00 to AL.0028.2.04800.00
Successor models
For questions regarding successor or replacement models and last-time orders, please contact our sales team.